T3 Turbine Housing, Stage III 76 trim - T3/T4 Turbo

Replacement exhaust / turbine housing for stage III T3/T4 turbos.

This housing has a undivided T3 inlet (exhaust manifold side) with 2.50" 4-Bolt downpipe outlet. Fits all stage III (3) 76 trim T turbos, commonly found on T3/T4 turbos. Direct bolt on & replaces / upgrades your existing housing. Your Pick Of A/R.

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.