Made In The USA
Your choice of Mild or 304 Stainless Steel, select from menu. T25/T26/GT25/GT28 turbo/manifold inlet flange. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the USA, threaded/tapped bolt holes, excellent finish, highest quality available.
Perfect for building your own custom manifold, modifying a existing manifold, etc. Same type of flange/bolt pattern as found on many OEM manifolds, including the 240sx (SR20DET)engine.
Himni Racing T25/GT25 Turbo/Manifold Inlet Flange
- Bolt Spacing: See Image
- Bolt Hole size: 8mm X 1.25 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defacts. Garrenteed to never crack, warp or otherwise fail.
Works with any turbo using a T25, T28, GT25R, GT28R, turbine/exhaust housing, such as:
T25, GT25, GT25R, GT2554R, T28, GT28, GT28R, GT2560R, GT28RS, GT2860RS, GT2871R, GT25/40R, GT2876R, GTX28R, GTX2860R, GTX2863R, GTX2867R, GT3071R-WG, GTX3071R, GT3076R, GT3076R-WG, GTX3076R, S200, etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$25.95Made In The USA
Made of solid 304 Stainless Steel. T3 (T31, T3/T4) Divided turbo/manifold inlet mounting flange/adapter/connector. (Often incorrectly called "twin-scroll') Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc.
- Brand: HIMN'I Racing
- Bolt Spacing: See image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500")
- Material: Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T3 divided turbine/exhaust housing, such as:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$47.90Made In The USA
Your choice of Mild or 304 Stainless Steel, select from menu. HR T3 (T31, T3/T4) undivided turbo/manifold inlet flange/adapter/connecter. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T3 undivided turbine/exhaust housing, such as:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$25.90Made In The USA
Himni Racing T3 (T31, T3/T4) TO T4 (T04) turbo/manifold inlet adapter/connecter mounting flange. Used to adapter a T4 turbo to a T3 exhaust manifold or vise-verse. Industry standard design, full 1/2" thick flanges on each side will not crack or warp under high heat, precision CNC machined & rainbow TIG welded in the US, threaded/tapped bolt holes accordingly, excellent finish, highest quality available.
This item is made to order & can be customized to your requirements.
Available as:
- #1 T3 on the manifold side, T4 On the turbo side.
- #2 T4 on the manifold side, T3 on the turbo side.
NOTE:: The adapter is available threaded or drilled through on either side flange. Standard is drilled through on manifold side & threaded on turbo side. Allows the adapter to bolt TO the manifold & the turbo to bolt TO the adapter. If for any reason you need something different than this default drill & threaded layout, please leave a note during checkout.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Adapter Side #1: T3/ T31
- Adapter Side #2: T4/ T04
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Overall Thickness/Height: 1.75"
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with many turbochargers such as:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, GT3071, GT3071R, GT3788R, GT40, GT4082, GT4088, GT4088R, GT4094, GT4094R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, GT-K 850, GT-K 1000, Billet GT-K750, Billet GT-K850, Billet GT-K1050 etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$109.00Made In The USA::
Your choice of Mild or 304 Stainless steel. HR T4 (T04) undivided turbo/manifold inlet flange/adapter/connector. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T4 undivided turbine/exhaust housing, such as:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT4088R, GT4094, GT4094R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, GT-K 850, GT-K 1000, Billet GT-K750, Billet GT-K850, Billet GT-K1050 etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$27.90Made In The USA::
Your choice of Mild or 304 Stainless steel. HR T4 (T04) Divided turbo/manifold inlet flange/adapter/connecter. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T4 divided, turbine/exhaust housing, such as:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT4088R, GT4094, GT4094R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, GT-K 850, GT-K 1000, Billet GT-K750, Billet GT-K850, Billet GT-K1050 etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$38.98Made In The USA
Made of higher carbon steel perfect for extreme heat applications. HR T6 (aka super T4, large diesel) divided or undivided turbo/manifold inlet mounting flange/adapter/connecter. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc. Select Divided Or Undivided from menu. Divided shown in picture.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T6 divided/undivided turbine/exhaust housing, such as:
GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT47, GT47R, GT4708, GT4708R, GTX47, GTX4708, GTX4708R, GT4718, GT4718R, GTX4718, GTX4718R, GT55, GT55R, GT5533, GT5533R, GTX55, GTX5518, GTX5518R w/ 81.1mm/84.8mm/85.8mm/87.8mm, GTX5533, GTX5533R w/ 91mm/94mm, S400/S400SX/S400SX4, S471/S471SX, S475/S475SX, S480, S480SX, S500, S510, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$58.90Made In The USA
Available in solid 304 Stainless Steel or Mild Steel. (Select flange material from menu) HR 3.00" inch inner diameter GT 4 Bolt turbo exhaust/downpipe flange/adapter/connecter. Features a machined recessed lip to insure simplified proper tube/pipe alinement & eliminates the edge of the tube from the exhaust flow path.
- Brand: HIMN'I Racing
- Design: GT 3" 4 Bolt Turbo Downpipe/Discharge Mounting Flange for T3 inlet turbine housings.
- Bolt Spacing: See Image
- Inner Diameter: 3.00" w/ recessed lip. For 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Material Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbochargers with a 3.00" GT 4 Bolt exhaust/turbine housing, Including:
T3/60-1, T3/T04S, T3/T04R, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$24.95Made In The USA
Available in solid 304 Stainless Steel or Mild Steel. (Select flange material from menu) 2.50" inch inner diameter GT 4 Bolt turbo exhaust/downpipe flange/adapter/connecter. For GT turbine housings with a T3 inlet, 2.50" 4 bolt outlet. Features a machined recessed lip to insure simplified proper tube/pipe alinement & eliminates the edge of the tube from the exhaust flow path.
- Brand: HIMN'I Racing
-
- Design: GT 2.50" 4 Bolt Turbo Downpipe/Discharge Mounting Flange for T3 inlet turbine housings.
- Bolt Spacing: See Image
- Inner Diameter: 2.50" w/ recessed lip. For 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Material Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbochargers with a 2.50" GT 4 Bolt exhaust/turbine housing, Including:
T3/60-1, T3/T04S, T3/T04R, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$27.99Made In The USA
Himni Racing 2 Bolt to V-Band Turbo To exhaust Converter/Downpipe discharge adapter. Converts 2 Bolt to a V-Band, or vise-a-verse. Makes connecting a turbo downpipe or exhaust tube simple & straight forward. Direct bolt on, no welding required. Machined 1 piece design or machined & Rainbow TIG welded depending on adapter size.
Available in a few different configurations: (select from menu)
2.50" 2 bolt to 3" V-Band
3.00" 2 Bolt to 3" V-Band
2.50" 2 Bolt to 2.50" V-Band
3.00" 2 Bolt to 2.50" V-band
- Brand: HIMN'I Racing
- Adapter Side #1: 2 Bolt w/ 2.50" or 3.00" I.D.
- Adapter Side #2, Option A: 2.50" V-Band (2.50" ID, 3.00" OD, Flat Face)
- Adapter Side #2, Option B: 3.00" V-Band (3.00" ID, 3.75" OD (95mm) Flat Face)
- Bolt Spacing: 3 7/8" center to center, 3 1/4" inner to inner, 4 3/4" (3" 2 Bolt sizing)
- Bolt Hole size: Ovalized. For use with standard 8mm and 10mm bolts/studs or SAE equivalent.
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$57.90Made In The USA
HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" 3_Bolt to a 2.50" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined & rainbow TIG welded. Note: This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications. This item is usually made to order.
- Brand: HIMN'I Racing
- Adapter Side #1: T3 3 Bolt w/ 2.50" opening.
- Adapter Side #2: 2.50" V-Band with 3 1/6" (78mm) O.D. flat face seal side.
- Bolt Spacing: About 74mm from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits Many Turbos with 2.5" 3 Bolt/5 Bolt hole turbine housings with internal wastegates, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$74.00Made In The USA
HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" 3_Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined & rainbow TIG welded. Note: This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.
V-Band side is available in two face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Adapter Side #1: T3 3 Bolt w/ 2.50" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: About 74mm from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits Many Turbos with 2.5" 3 Bolt/5 Bolt hole turbine housings with internal wastegates, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$78.90Made In The USA
HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" GT 4 Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.
V-Band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Adapter Side #1: GT 2.50 4 Bolt w/ 2.50" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.25"
- Material Type: Mild Carbon Steel or Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits Many Turbos with 2.5" GT 4 Bolt turbine housing downpipe discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$57.90Made In The USA
HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 3.00" GT 4 Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined 1 piece (mild carbon steel) or Rainbow TIG welded (stainless steel) design. This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.
V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Adapter Side #1: GT 3.00 4 Bolt Bolt w/ 3.00" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.25"
- Material Type: Mild Carbon Steel or Stainless steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits Many Turbos with 3.00" GT 4 Bolt turbine housing downpipe discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$57.90Made In The USA HR 6 Bolt downpipe discharge mounting flange for Garrett GT32 GT3271 turbo. Fits both internal & External wastegated housings. Easily welds to any 2.5" + downpipe to allow for easy downpipe to turbo connection. Machined recessed tube fit lip.
- Brand: HIMN'I Racing
-
- Design: GT32 exhaust downpipe flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" w/ recessed lip. For 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In The USA
3.5" Machined V-Band Flange and clamp set for the compressor outlet/discharge on the GT42, GT4294, GT4202, GT42R, GT42RS, GT4294R, GT4202R, GTX42R, GTX4294R, GTX4202R turbo units.
This 6061 T6 billet aluminum compressor housing v-band flange & matching 304 stainless steel v clamp set is the very best way to adapt intercooler/ compression tube to the Garrett GT42R turbo. Extremely high quality, CNC machined, Made in USA. Burst proof & holds a perfect seal even under the highest boost pressures. The flange features an O-ring grooved matting surface to seamlessly seal the flange face to the compressor housing/cover for an air tight connection. Has a smooth inside taper for a restriction-free flow path.
- Brand: HIMN'I Racing
-
- V-band adapter flange & clamp kit for GT42R Compressor housing
- Adapter Side #1: 42R V-Band w/ O-Ring
- Adapter Side #2: 3.50" OD Silp-On
- Inner Diameter: Matches GT42R Comp Housing outlet I.D.
- Material Type: T6 Aircraft grade billet aluminum
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Clamp: Extreme duty, solid SS w/ lock nut.
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In The USA
HR 2 Bolt TO Slip-On compressor inlet adapter flange for Garrett GT28R/ GT2860R turbo. Available in 3 different slip-on inlet sizes. Select from 1.75", 2.00" or 2.5" OD. Used to convert 2 bolt mounting to a standard slip-on air intake pipe connection. Use with silicone coupler. Machined from billet aluminum to be lightweight & durable. The opening is smoothly tapered for maximum flow. Includes reusable o-ring to provide a leak-free seal.
Common 2 hole mounting pattern measures 3 3/8" (about 86mm) apart, center to center. Fits many turbos including Garrett, GT28, GT28R, GT2560R, GT28RS, etc. Order Turbo/ CHRA part numbers 466541-1, 466541-1, 446179-12, 446179-38, 707160-7, 446179-54
- Brand: HIMN'I Racing
-
- 2 Bolt TO Slip-On compressor inlet adapter GT28R/ GT2860R.
- Adapter Side #1: 2 Bolt w/ O-ring
- Adapter Side #2: Slip On
- Bolt Spacing: 3 3/8" (about 86mm) apart measured from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm or SAE equivalent
- Overall Height: 1.25"
- Material Type: T6 Aircraft grade billet aluminum
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Also see our 3" Race version for the ultimate in flow.
$38.95Made In The USA
HR 2 Bolt TO Slip-On compressor inlet adapter flange for Garrett GT28R/ GT2860R turbo. Large 3" inlet race version. Used to convert 2 bolt mounting to a standard slip-on air intake pipe connection. Use with silicone coupler. Machined from billet aluminum to be lightweight & durable. The opening is smoothly tapered for maximum flow. Includes reusable o-ring to provide a leak-free seal.
Common 2 hole mounting pattern measures 3 3/8" (about 86mm) apart, center to center. Fits many turbos including Garrett, GT28, GT28R, GT2560R, GT28RS, etc. Order Turbo/ CHRA part numbers 466541-1, 466541-1, 446179-12, 446179-38, 707160-7, 446179-54
- Brand: HIMN'I Racing
-
- 2 Bolt TO Slip-On compressor inlet adapter GT28R/ GT2860R.
- Adapter Side #1: 2 Bolt w/ O-ring
- Adapter Side #2: Slip On 3.00"
- Bolt Spacing: 3 3/8" (about 86mm) apart measured from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm or SAE equivalent
- Overall Height: 2.00"
- Material Type: T6 Aircraft grade billet aluminum
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Also see our compact 2.50" street version of this item.
$47.99Made In The USA
HR 3-Bolt Compressor cover TO Slip-On OUTLET mounting flange adapter converter for the GT25R, GT28R, GT2860R, GT28RS turbochargers. 2.00" outlet with rolled lip for secured fit, 3 bolt mounting pattern & 1/8" NPT port for boost reference. Allows you to use a silicone coupler for your intercooler pipe. Fittings included, durable o-ring seal included. Use with silicone coupler. Machined from billet aluminum to be lightweight & durable. The opening is smoothly tapered for maximum flow. Includes reusable o-ring to provide a leak-free seal.
- Brand: HIMN'I Racing
-
- 3 Bolt TO Slip-On compressor outlet adapter GT25R, GT28R, GT2860R.
- Adapter Side #1: 3 Bolt w/ O-ring
- Adapter Side #2: 2.00" Slip On w. lip
- Bolt Spacing: 2 1/8" apart measured from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm or SAE equivalent
- Overall Height: 1.50"
- Material Type: T6 Aircraft grade billet aluminum
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbos including:
Garrett, GT25, GT25R, GT2554, GT2554R, GT28, GT28R, GT2560R, GT2854R, GT2860R, etc. Or Turbo/ CHRA part numbers 466541-1, 466541-1, 446179-12, 446179-38, 707160-7, 446179-54, etc
Made In The USA
HR 3 Bolt Compressor Outlet flange only.(no slip on lip) Mild Steel, Fits many T25, T28, GT25R, GT28R, GT28RS turbochangers. 2.00" I.D., 3 bolt mounting pattern. Allows you to directly weld a intercooler pipe to the flange. Great for tight spaces. Machinced for welding to a steel tube/pipe.
- Brand: HIMN'I Racing
- Design: HR 3 Bolt GT25R/GT28R Compressor Outlet flange only.
- Bolt Hole size: For use with standard 8mm or SAE equivalent
- Inner Diameter: 2.00" inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/4" inch
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In The USA
HR 3 Bolt T3 2.50" Internal waste gate mounting flange/ adapter. Used for downpipe to turbine hosuing discharge connection. This flange is most often used on T3 5 bolt exhaust housings that use an internal wastegate swing valve housing with a 3 bolt down pipe outlet. Easily welds to any 2.5" downpipe to allow for simple turbo connection. This flange also bolts to our T3 5_bolt internal wastegates swing valve housings.
- Brand: HIMN'I Racing
- Design: T3 2.50" 3 Bolt exhaust flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" w/ recessed alignment lip/groove. For 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA, HR 2.5 inch ID, 2-Bolt, Steel flange with 2.50" inner diameter for welding on to 2.50" OD tubing / pipe. Very common design used on many exhaust applications.
- Brand: HIMN'I Racing
- Design: 2.50" 2 Bolt Exhaust Flange
- Bolt Spacing: 4.00" measured from the center of one hole to the center of the other (4" on center)
- Bolt Hole size: Slotted For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" for 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA, HR 3 inch ID, 2-Bolt, Steel flange with 3" inner diameter for welding on to 3" OD tubing / pipe. Very common design used on many exhaust applications. Select mild or stainless steel from menu.
- Brand: HIMN'I Racing
- Design: 3" 2 Bolt Exhaust Flange
- Bolt Spacing: 4.00" measured from the center of one hole to the center of the other (4" on center)
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" for 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon or Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA, HR 4 inch ID, 2-Bolt, Steel flange with 4.00" inner diameter for welding on to 4" OD tubing / pipe. Very common design used on many exhaust applications.
- Brand: HIMN'I Racing
- Design: 4.00" 2 Bolt Exhaust Flange
- Bolt Spacing: 5.00" measured from the center of one hole to the center of the other (5" on center)
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 4.00" for 4.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA, HR 2.5 inch ID, 3-Bolt, Steel flange with 2 1/2" inner diameter for welding on to 2.50" OD exhaust tubing/pipe/systems.
- Brand: HIMN'I Racing
- Design: 2.50" 3 Bolt Exhaust Flange
- Bolt Spacing: Image Shows spacing for 3" 3 bolt.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.5" for 2.5 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA, HR 3 inch ID, 3-Bolt, Steel flange with 3" inner diameter for welding on to 3" OD tubing / pipe. Fits many of the T3 exhaust turbine housings with 3" 3 bolt exit/ downpipe discharge.
- Brand: HIMN'I Racing
- Design: 3" 3 Bolt Exhaust Flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" for 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Outter Diameter:
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel )
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In The USA
T3 5-Bolt turbo downpipe/exhaust mounting flange. For use with 2.50" O.D. tube/pipe. Fits standard T3 5 Bolt turbine/exhaust housing with 5 Bolt discharge/exist. The outer 5 holes are used to bolt the flange to the turbine housing & your down pipe welds to the center hole. Use with External wastegate layout. Machined & a full 1/2" thick to prevent warping under high heat.
- Brand: HIMN'I Racing
- Design: T3 5 Bolt mounting flange - 2.50"
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" w/ recessed alignment lip/groove. For 2.50" inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/2" inch (0.5.00") Resists Warping
- Material Type: Mild Carbon Steel Or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbos with T3 5 bolt turbine/exhaust housing, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Made In The USA
For use with 2.5" 3-Bolt downpipes & standard T3 5_bolt exhaust housings. The outer 5 holes are used to bolt the flange to a turbo exhaust/turbine housing & the inner 3 holes allow a 3_Bolt downpipe flange to mount to this flange.
- Brand: HIMN'I Racing
- Design: T3 5 Bolt Turbo Downpipe Flange for 3 BOLT exhaust.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent.
- Inner Diameter: 2.50" for 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/2" inch (0.5.00") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbos with T3 5_bolt housings, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Made In The USA
T3 5-Bolt turbo downpipe/exhaust mounting flange. For use with 3.00" O.D. tube/pipe. Fits standard T3 5 Bolt turbine/exhaust housing with 5 Bolt discharge/exist. The outer 5 holes are used to bolt the flange to the turbine housing & your down pipe welds to the center hole. Use with External wastegate layout. Machined & a full 1/2" thick to prevent warping under high heat.
- Brand: HIMN'I Racing
- Design: T3 5 Bolt mounting flange - 3.00"
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" w/ recessed alignment lip/groove. For 3.00" inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/2" inch (0.5.00") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbos with T3 5 bolt turbine/exhaust housing, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Made In USA
HR T3 GT 5 bolt divorced downpipe exist/outlet flange. This flange is not for use with standard "Ford Style" 5 Bolt housings. It is the GT version & is only used with T3 GT 5 bolt turbine/exhaust housings that have a built in internal wastegate swing valve. 1/2" thick, beautifully machined, Stainless steel downpipe discharge flange with divided/divorced downpipe & wastegate ports. Allows the internal waste gate & downpipe to use separate pipes. (like a external wastegate) Provides a less restrictive flow path for the wastegate as it's no longer mixing with the downpipe flow. Just like a external wastegate, the wastegate pipe can dumped to open air (race use unly) or plumbed back into the exhaust.
Has a 3.00" downpipe recseed groove & 2.00" wastegate hole/groove. Can be used with our downpipe transitions to decrease/increases the downpipe size if needed. Fits many turbos using a T3 5 Bolt turbine housing WITH integrated internal waste gate swing valve. Not for use with housings that require a bolt on swing valve assembly.
- Brand: HIMN'I Racing
- Opening Size #1: 3.00" I.D. w/ recessed alignment lip/groove. For 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Adapter Side #2: 2.00" I.D. (Waste Gate port)
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: 304 Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In The USA
HR Laser cut T4 ON-CENTER downpipe mounting flange. Mild steel, 4 bolt round outline fits ON-CENTER T04 turbos only. 3" tube/pipe opening.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Inner Diameter: 3.00" I.D. For use with 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent.
- Material Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an Himni Racing flange to insure the very highest of quality.
$28.90Made In USA
HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T3 5_bolt (aka Ford style) exhaust/turbine housing downpipe discharge to a 2.50" V-band exit. The outer 5 holes are used to bolt the flange to the back of the exhaust housing & a 2.50" V-band flanged downpipe will bolt/clamp directly to it. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.
- Brand: HIMN'I Racing
- Design: T3 5 Bolt To V-band Adapter
- Adapter Side #1: T3 5-Bolt w/ 2.50" I.D.
- Adapter Side #2: 2.50" I.D. V-band with 3 1/16" (78mm) O.D. face side.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.00"
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits many turbos with T3 5_bolt turbine housings, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
TIG Welded
Made In USA
HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T3 5_bolt (aka Ford style) exhaust/turbine housing downpipe discharge to a 3.00" V-band exit. The outer 5 holes are used to bolt the flange to the back of the exhaust housing & a 3.00" V-band flanged downpipe will bolt/clamp directly to it. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.
V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Design: T3 5 Bolt To V-band Adapter 3.00"
- Adapter Side #1: T3 5-Bolt w/ 2.50" I.D. (transitions to 3.00")
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits many turbos with T3 5_bolt turbine housings, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$87.90Made In USA
HR downpipe discharge outlet flange for the Garrett GT15 /GT1548 turbo. 3" Oval opening with recessed alinement groove, 1/2" steel will not warp & works with our 3" round to oval transition found in the recommended items below.
- Brand: HIMN'I Racing
- Design: GT1548 Down Pipe Flange.
- Bolt Hole Size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" Oval w/ recessed alignment lip/groove. For 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA
HR T25/ GT25 /T28/ GT28 oval downpipe discharge/outlet mounting flange. For T25/GT25 internal waste gate turbo turbine housings. Designed with both bolt patterns and recessed groove for 3.00" oval tube/pipe. Works perfect with our 3.00 inch "Oval to Round" SS transition.
- Brand: HIMN'I Racing
- Design: T25/ GT25 /T28/ GT28 oval downpipe exhaust flange.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" Oval w/ recessed alignment lip/groove. For 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
For use with Internal wastegate T25/GT25 based turbos using a T26/GT25 exhaust/turbine housing suchs as:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc
Made In USA
HR T25/ GT25 /T28/ GT28 special Pocket Carved downpipe discharge/outlet mounting flange. For T25/GT25 internal waste gate turbo turbine housings. Outstanding finish with a pocket machined carved in to the flange to clear the internal wastegate swing valves. 2" opening for 2.00 inch downpipes.
- Brand: HIMN'I Racing
- Design: T25/ GT25 /T28/ GT28 Pocket Carved down pipe exhaust flange.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Inner Diameter: 2.00" round w/ recessed alignment lip/groove. For 2.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/4" inch (0.750") Resists Warping
- Material Type: Mild Carbon Steel or 304 Stainless steel. (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits all T25 / T28 / GT25 / GT28 exhaust housings with internal wastegate such as: T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, etc.
$53.90Made In USA
HR T25/ GT25 /T28/ GT28 divorced/ divided downpipe discharge/outlet mounting flange. For T25/GT25 internal waste gate turbo turbine housings. 1/2" thick, machined Stainless steel downpipe discharge outlet flange with divided/ divorced down pipe & wastegate ports. Allows the internal wastegate & downpipe to use separate pipes/tubes. (like a external waste gate) Provides a less restrictive flow path for the wastegate as it's no longer mixing with the down pipe flow. Just like a external waste gate, the wastegate pipe can dumped to open air (race only) or plumbed back into the exhaust.
- Brand: HIMN'I Racing
- Design: T25/ GT25 /T28/ GT28 divorced down pipe exhaust flange.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Inner Diameter #1: 2.25" round w/ recessed alignment lip/groove. For 2.25 inch O.D. tube/pipe/downpipe/exhaust
- Inner Diameter #2: 1.50" round (wastegate port)
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: 304L Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits all T25 / T28 / GT25 / GT28 exhaust housings with internal wastegate such as: T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$48.00Made In USA
HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T25/ T28/ GT25/ GT28 5_Bolt exhaust/turbine housing downpipe discharge to a 2.50" or 3.00" V-band exit. (your choice, select from menu) The outer 5 holes are used to bolt the adapter flange to the back of a T25 internal wastegate exhaust/turbine housing, converting to a V-band for use with 2.50" or 3.00" downpipe. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.
- Brand: HIMN'I Racing
- Design: T25/ T28/ GT25/ GT28 To V-band Adapter 3.00"
- Adapter Side #1: T25 outlet Oval
- Adapter Side #2, Option #1: 2.50" V-band with 2.50" Inch I.D./ 3 1/16" O.D. flat face.
- Adapter Side #2 Option #2: 3.00" V-band with 3.00" I.D., 3 5/8" (92mm) O.D. face side.
- Adapter Side #2 Option #3: 3.00" V-band with 3.00" I.D., 3 3/4" (95mm) O.D. face side. (Most common)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 2 1/4" Inch (2.25")
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits most T25, T28, GT25, GT28 Internal wastegate exhaust housings, Including:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$89.90Made In USA. HR 3.00" to 3.50" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Made in the USA using only USA manufactured tubing. Can easily be cut to remove the legs for applications where space is tight.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 3.50 inch SS transition.
- Adapter Side #1: 3" O.D.
- Adapter Side #2: 3.5" O.D.
- Overall Height/Length: 3 Inch Long w/ legs, 1.25" long if legs are removed.
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 2" to 2.50" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Low pro design. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 2 Inch TO 2.5 inch SS transition.
- Adapter Side #1: 2" O.D. (50.8mm)
- Adapter Side #2: 2.5" O.D. (63mm)
- Overall Height/Length: 1.20" (32mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 2.50" to 3.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Low pro design. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 2.50 Inch TO 3.00 inch SS transition.
- Adapter Side #1: 2.5" O.D. (63mm)
- Adapter Side #2: 3" O.D. (76mm)
- Overall Height/Length: 1.00" (25mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR "SHORT VERSION" 3.00" to 4.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Legs can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing. Similar to part number R12S044
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 4.00 inch SS transition. (Short Version)
- Adapter Side #1: 3" O.D. (76mm)
- Adapter Side #2: 4" O.D. (102mm)
- Overall Height/Length: 1.8" (45mm) long
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR "LONG VERSION" 3.00" to 4.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Legs can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing. Similar to part number R12S365 but longer.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 4.00 inch SS transition. (Long Version)
- Adapter Side #1: 3" O.D. (76mm)
- Adapter Side #2: 4" O.D. (102mm)
- Overall Height/Length: 3.50" (88.9mm) long w/ legs, 1.75" (44.45mm) long if legs are removed.
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 3.00" to 60mm Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Legs can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 60 millimeter SS transition.
- Adapter Side #1: 3" O.D.
- Adapter Side #2: 60 mm O.D.
- Overall Height/Length: 3.75" long w/ legs, 1.00" long when legs are removed.
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 3.5" to 4" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.50 Inch TO 4.00 inch SS transition.
- Adapter Side #1: 3.5" O.D. (89mm)
- Adapter Side #2: 4" O.D. (102mm)
- Overall Height/Length: 1.25 Inch Long (32mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 4" to 5" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 4.00 Inch TO 5.00 inch SS transition.
- Adapter Side #1: 4" O.D. (102mm)
- Adapter Side #2: 5" O.D. (127mm)
- Overall Height/Length: 1.8 Inch Long (45mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR formed 3.00" round to oval Stainless Steel Smooth Transition reducer pipe/ adapter tube. Works great with T3, T3/T4, T25/T28 turbo oval downpipe exhaust flanges any other application requiring an oval transition in a short distance. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Round TO Oval SS transition.
- Adapter Side #1: 3.00" O.D. Round
- Adapter Side #2: 3.00" O.D. Oval (3.50" long X 2 1/8" short)
- Overall Height/Length: 1.50" long
- Material Type: 16 Gauge US Stainless Steel, extremely durable.
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Made In USA. HR 3.00" V-Band to 60mm Stainless Steel Smooth Transition reducer pipe/tube. Has a 3" V-band flange rainbow TIG welded to one side & 60mm OD tube on the other. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Leg can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing.
V-band side is available in two Face sizes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Design: 3.00 Inch V-Band TO 60 mm SS transition.
- Adapter Side #1: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Adapter Side #2: 60mm/ Millimeter
- Overall Height/Length: 4.00" long w/ leg, 1.75" long when leg is removed.
- Material Type: Mild Carbon steel or stainless steel flange. Transition section is always Stainless Steel by default.
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
Made In The USA
HR 3" V-band to 3.5" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Rainbow TIG welded to perfection, very high quality & durable.
V-band is available in two Face sizes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Adapter Side #1: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Adapter Side #2: 3.50" O.D. Tube, 16 Gauge stainless
- Overall Thickness/Height: 3.25" Long
- Material Type: V-Flange available in Mild Carbon or Stainless steel. Tube is all stainless.
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits Many Turbos & exhaust with 3.00" v-band or discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$69.00Made In The USA
HR 3" V-band to 4" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Also available with a 3" GT 4 bolt flange rather then the 3" V-band flange. Pick from menu. Rainbow TIG welded to perfection, very high quality & durable.
3.00" V-band is available in two Face sizes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
Overall Thickness is available in two sizes. Select from menu.
#1: Short, 2" Thick
#2: Long, 3.75" Thick
- Brand: HIMN'I Racing
- Adapter Side #1: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side
- Adapter Side #2: 4.00" O.D. Tube, 16 Gauge stainless
- Overall Thickness/Height: Short (2") or Long (3.75") Select from menu.
- Material Type: V-Flange available in Mild Carbon or Stainless steel. Tube is all stainless by default.
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.005
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits Many Turbos & exhaust with 3.00" v-band or discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$69.00Standard 18mm X 1.50 pitch o2 Sensor bung plug. Ideal for blocking of an extra 02 sensor port. Fits in place of 99% of OEM & aftermarket sensors including Bosch units. Hex head for the easiest install and removable vs allen type.
$2.99Made In USA, CNC machined Stainless Steel o2 sensor bung & plug set is designed to an o2 sensor anyplace you need one or, for plugging off a exciting hole. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units. The set includes a FREE, reusable, Aluminum gasket for use with the plug to insure 100% leak-free sealing when sensor is not in use.
Includes:
-CNC Machined 18mm Stainless Steel o2 Bung
-Steel o2 Plug
-Reusable Aluminum Gasket
Made In USA, CNC machined Stainless Steel o2 sensor bung is designed for adding a o2 sensor anyplace you need one. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units.
$7.98CNC machined mild steel downpipe flange for the stock turbo on all Subaru EJ2X engines. Allows for custom downpipes.
$24.00Made In The USA::
This Flange adapter allows any T3 flanged turbo to bolt up to the Volvo manifold that use the Mitsubishi TD0X turbos (Models 750, 850, V70, C70, etc.) The adaptor sits inside the flange on the manifold & fills the space, achieving a leak free seal.
Allows the use of many new turbos such as, T3, T3/T4, GT28RS, GT2871R, GT2876R, GT3071R, GT3076R, GT30R, GT3040R, GT35/40R, GT35R)
$48.30CNC machined mild steel downpipe flange for the stock K03 & K04 turbo on the FWD VW 1.8T Golf, Jetta & Beetle. Great for custom downpipes.
$24.00CNC machined mild steel downpipe flange for the stock turbo on the VW/Audi FWD 2.0L FSI Golf, Jetta & A3. Great for custom downpipes.
$36.00Made In The USA::
This is a downpipe Flange for the stock turbo found on the Mazdaspeed 3 & 6. Bolts to the back of the turbo & allows you to create your own custom downpipe. 3/8" think to prevent warping. CNC machined.
$24.00This is a downpipe V-band adapter for the stock turbo found on the Mazdaspeed 6. One side is flanged to fit the back of the stock turbo or stock downpipe while the other side is a 3.00" V-band. Nice formed stainless transition for smooth flow. CNC machined & fully TIG welded.
$95.00You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.