Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
1/8" Silicone Vacuum Hose Hi-Temp.
Choose Red, Blue or Black from menu.
Superior Quality, USA made, high temp. 1/8" ID Silicone vacuum line. Great for Turbo pressure line, Blow off valves, wastegate lines, fuel pressure regulators, manifold vacuum, etc. Price is Per foot, Sold By the foot.
Note: For 1 foot add quaintly 1, 2 feet, add quantity 2, etc. Please remember that not all silicone hose is created equal. This is the good stuff & not to be confused with the cheap junk sold at your local auto store. They are not one in the same.
$2.19
O2 Sensor Plug/Bolt: 18mm
Standard 18mm X 1.50 pitch o2 Sensor bung plug. Ideal for blocking of an extra 02 sensor port. Fits in place of 99% of OEM & aftermarket sensors including Bosch units. Hex head for the easiest install and removable vs allen type.
$2.99
Himni SS Oil Pan Nut & Bolt Kit, 86-91 Mazda RX-7
Replaces Oil Pan hardware. 86-91 Mazda RX-7 (All N/A & Turbo II) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni SS Oil Pan Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Oil Pan hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Stainless Steel O2 Sensor Bung Fitting Adapter:18mm
Made In USA, CNC machined Stainless Steel o2 sensor bung is designed for adding a o2 sensor anyplace you need one. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units.
$7.98
Himni Racing Classic Rotor Blade Logo Keychain, Rotary SS
Show your love with an authentic Himni Racing keychain/keyring featuring the classic HR Rotor Blade logo. Made of polished stainless steel & laser engraved. Perfect for all Mazda RX-7, RX-8 & rotary engine fans.
$8.50
Himni 3/8" Stainless Steel Straight Rod
Sold by the foot.
This is a 3/8" diameter 304 grade stainless steel straight rod material / stock. Has many uses & is great for custom exhaust hangers, exhaust manifold supports, braces & countless other uses. Bendable and weldable .
$8.95
Himni SS Turbo/Oil Fill Nut & Bolt Kit, 87-91 Mazda RX-7
Replaces Turbocharger oil, CAS & Oil Filler hardware. 87-91 Mazda RX-7 (Turbo II only) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
-10 AN Male ALUMINUM Weld Bung
-10 AN male Aluminum weld bung. Has correct bore throughout with a seat on the back side for the weld bead. Great for fuel, oil, etc. Made in the USA
$9.95
-10 AN Male STEEL Weld Bung
-10 AN male steel weld bung. Has correct bore throughout with a seat on the back side for the weld bead. Great for fuel, oil, etc. Made In the USA.
$9.95
Stainless Steel O2 Sensor Bung Fitting & Plug Set: 18mm
Made In USA, CNC machined Stainless Steel o2 sensor bung & plug set is designed to an o2 sensor anyplace you need one or, for plugging off a exciting hole. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units. The set includes a FREE, reusable, Aluminum gasket for use with the plug to insure 100% leak-free sealing when sensor is not in use.
Includes:
-CNC Machined 18mm Stainless Steel o2 Bung
-Steel o2 Plug
-Reusable Aluminum Gasket
3 Bolt Downpipe Exhaust Flange - For 2.50" Pipe/Tube
Made In USA, HR 2.5 inch ID, 3-Bolt, Steel flange with 2 1/2" inner diameter for welding on to 2.50" OD exhaust tubing/pipe/systems.
- Brand: HIMN'I Racing
- Design: 2.50" 3 Bolt Exhaust Flange
- Bolt Spacing: Image Shows spacing for 3" 3 bolt.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.5" for 2.5 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
3 Bolt Downpipe Exhaust Flange - For 3.00" Pipe/Tube
Made In USA, HR 3 inch ID, 3-Bolt, Steel flange with 3" inner diameter for welding on to 3" OD tubing / pipe. Fits many of the T3 exhaust turbine housings with 3" 3 bolt exit/ downpipe discharge.
- Brand: HIMN'I Racing
- Design: 3" 3 Bolt Exhaust Flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" for 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Outter Diameter:
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel )
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Himni 1.75" Inch Straight Pipe - Stainless Steel Tube
1.75" Diameter straight Stainless Steel pipe/tube --- 1 ft. long. Made in the USA using only USA manufactured tubing. Himni Racing High quality, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing. Perfect for custom Intakes, Intercooler piping & exhaust systems.
Rust & corrosion resistant.
Durable & light weight
Specs:
Made In USA
Diameter: 1.75" inch
Gauge (Wall thickness): 16
Length: 1 foot stick
Metal Type: 304 / 304L Stainless Steel
-4 AN To 1/8" NPT FILTER Fitting w/ Dirt Trap- Discontinued
This item has been Discontinued & is no longer available.
This is a filtered fitting. 1/8" NPT male to -4 an male. Anodized aluminum. Has built in screen (dirt trap) on the 1/8" NPT side. Commonly used in-line to 'filter' the oil feed/inlet to a turbocharger.
$11.00
Himni SS Front Cover Nut & Bolt Kit, 86-91 Mazda RX-7
Replaces Front Engine Cover hardware. 86-91 Mazda RX-7 (All, N/A & Turbo II) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Tial 38mm Waste Gate Block Off Flange
HR external wastegate bock off flange/plate for Tial 38mm/35mm & Turbonetics Deltagate external wastegate. Great for blocking off the wastegate opening on turbo manifolds when using internal wastegate turbo(s). 3/8" thick to prevent warping in high temperature applications. Made in the USA.
$12.70
2 Bolt Exhaust Mounting Flange - 2.50" Pipe/Tube
Made In USA, HR 2.5 inch ID, 2-Bolt, Steel flange with 2.50" inner diameter for welding on to 2.50" OD tubing / pipe. Very common design used on many exhaust applications.
- Brand: HIMN'I Racing
- Design: 2.50" 2 Bolt Exhaust Flange
- Bolt Spacing: 4.00" measured from the center of one hole to the center of the other (4" on center)
- Bolt Hole size: Slotted For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" for 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
2 Bolt Exhaust Mounting Flange - 3.00" Pipe/Tube SS
Made In USA, HR 3 inch ID, 2-Bolt, Steel flange with 3" inner diameter for welding on to 3" OD tubing / pipe. Very common design used on many exhaust applications. Select mild or stainless steel from menu.
- Brand: HIMN'I Racing
- Design: 3" 2 Bolt Exhaust Flange
- Bolt Spacing: 4.00" measured from the center of one hole to the center of the other (4" on center)
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 3.00" for 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon or Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Himni SS Upper Intake Nut & Bolt Kit, 87-91 Mazda RX-7
Replaces Upper Intake Manifold hardware. 87-91 Mazda RX-7 (Turbo II only) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
HR .75" 90 Degree Turbo Silicone Coupler/Elbow (3/4")
HR .75" (3/4") 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 0.75” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR Quick-Tap Turbo/Boost/Vacuum Hose Barb Sorce
Tapping the compressor housing for a boost pressure source just got easier...because you no longer have to do it. A boost pressure source near the compressor housing is critical for proper boost control, however, removing the compressor housing from the turbo to tap it for a pressure signal fitting can be a real chore...especially when the turbo is already mounted to the engine. Each HR Quick-Tap kit includes all parts necessary to easily create a reliable boost pressure port on the first silicone connector out of the turbo compressor outlet. Our Quick-Tap kit features 100% of the functionality and reliability of a fitting on the compressor housing without the hassle of drilling and tapping the housing itself.
Each kit includes:
1 CNC machined aluminum barb fitting with thread body and sealing surface
1 Stainless Steel washer
1 Stainless Steel Nut
1 Stainless Steel retainer clip
Note:
To use the HR Quick-tap kit, simply punch a 5/16" (8mm) hole directly into the silicone connector and install the fitting kit. This can be easily done using an off-the-shelf hole puncher.The product has been thoroughly tested on the type of reinforced multi-layer silicone connectors that we sell. The intricate design of the fitting assembly does not leak boost or damage the silicone connector if used properly. The fitting assembly is also designed to accomodate other similar silicone connectors on the market with varying thicknesses.
Himni SS Pulleys & Alternator Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Pulleys & Alternator hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni SS Upper Intake Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Upper Intake Manifold hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
HR 1.00" 90 Degree Turbo Silicone Coupler/Elbow
HR 1.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.00” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size & radius selected)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
Himni SS Throttle Body & Elbow Nut & Bolt Kit, 86-91 Mazda RX-7
Replaces Throttle Body & Elbow hardware. 86-91 Mazda RX-7 (All N/A & Turbo II) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni SS Throttle Body & Elbow Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Throttle Body & Elbow hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
GT Oil Feed Fitting w/ Restrictor : -4 an GT BB Turbos
Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -4 AN line. Has a built-in oil restrictor to supply the GT turbos the amount of oil they need while keeping your oil pressure up. Too much oil feed can blow the turbo's seals. **Also for use on the Garrett T ball bearing turbos**
Note:: The use of this fitting / restrictor is highly recommended. The Garrett GT series turbos do not require as much oil to be fed to the bearings, compared to the old T Series turbos.
The benefits of use include:
Protects the turbo's seals from excessive oil feed.
No more oil pressure drop. (allows your engine to maintain a higher oil pressure)
A simple & secure way to attach a standard -4 AN oil feed line.
Fits the turbos below:
GT28R, GT28RS, GT2871R, GT2876R / GT25/40R, GT30R, GT3071R, GT3076R, GT3040R, GT35R & More.
Himni Racing Machining Service fee
Baseline machining service fee for specific customers only. Add to order when directed here by an HR employee only.
$15.00
Himni SS Lower Intake Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Lower Intake Manifold hardware. 93-99 Mazda FD3S RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni SS PULLEY & ALT. Nut & Bolt Kit, 86-91 Mazda RX-7
Replaces Pulleys & Alternator hardware. 86-91 Mazda RX-7 (ALL N/A & Turbo II) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
2 Bolt Exhaust Mounting Flange - 4.00" Pipe/Tube
Made In USA, HR 4 inch ID, 2-Bolt, Steel flange with 4.00" inner diameter for welding on to 4" OD tubing / pipe. Very common design used on many exhaust applications.
- Brand: HIMN'I Racing
- Design: 4.00" 2 Bolt Exhaust Flange
- Bolt Spacing: 5.00" measured from the center of one hole to the center of the other (5" on center)
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 4.00" for 4.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Tial 38mm MVS Wastegate Block Off Flange Plate
Himni Racing Tial 38mm MVS V-band external wastegate block off flange. Used to block off the wastegate inlet flange on an exhaust manifold/header or turbine housing. An ideal part if your are not going use the wastegate mounting. CNC machined in the USA & made of billet mild steel. Attaches to the manifold or turbine housing using a Tial MVS INLET v-band clamp, sold separately.
- Brand: HIMN'I Racing
- Application: TiAL 38mm MVS wastegate block off flange.
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Tial 44mm V44 & MVR Wastegate Block Off Flange Plate
Himni Racing Tial 44mm V44 & MVR V-band external wastegate block off flange. Used to block off the wastegate inlet flange on an exhaust manifold/header or turbine housing. An ideal part if your are not going use the wastegate mounting. CNC machined in the USA & made billet mild steel. Attaches to the manifold or turbine housing using a Tial 44mm INLET v-band clamp, sold separately.
- Brand: HIMN'I Racing
- Application: TiAL 44mm V44 & MVR wastegate block off flange.
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
T/BIG GT Series Turbo Oil Feed Inlet Flange - 1/8" NPT
Made In USA. Himni Racing T-Series & Large frame GT Series turbo oil feed/inlet adapter flange with 1/8" NPT. For use with all the turbochargers listed below. Machined from T6 air craft grade aluminum to be lightweight, durable & to provide an exact fit with leak-free sealing. High quality, beautiful piece. The center oil feed port is threaded with a 1/8" female NPT for use with any standard 1/8" NPT fitting or our .035 / .065 built in restrictor fitting.
- Brand: HIMN'I Racing
- Design: T & Large GT Oil Feed Flange w/ 1/8" NPT.
- Center Port Size: 1/8" Female NPT
- Bolt Spacing: 38mm from the center of one hole to the center of the other. (on center)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Material Type: T6 Billet aluminum
- Finish: Excellent, Raw, Smooth Machined
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not otherwise fail.
Fits Most T Series & Large frame GT Serise turbos including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, T51R, GT3788R, GT40, GT40R, GT40RS, GT4088, GT4088R, GT4094, GT4094R, GTX4088R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, GT47, GT47R, GT4708, GT4708R, GTX4708R, GT4718, GT4781R, GT55, GT55R, GT5518, GT5518R, GT5533, GT5533R
Himni SS Lower Intake Nut & Bolt Kit, 87-91 Mazda RX-7
Replaces Lower Intake Manifold hardware. 87-91 Mazda RX-7 (Turbo II only) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni 2" To 2.5" Transition Reducer Pipe/Tube- Stainless Steel
Made In USA. HR 2" to 2.50" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Low pro design. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 2 Inch TO 2.5 inch SS transition.
- Adapter Side #1: 2" O.D. (50.8mm)
- Adapter Side #2: 2.5" O.D. (63mm)
- Overall Height/Length: 1.20" (32mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Himni 2.5" To 3" Transition Reducer Pipe/Tube- Stainless Steel
Made In USA. HR 2.50" to 3.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Low pro design. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 2.50 Inch TO 3.00 inch SS transition.
- Adapter Side #1: 2.5" O.D. (63mm)
- Adapter Side #2: 3" O.D. (76mm)
- Overall Height/Length: 1.00" (25mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Himni SS Water Pump & Housing Nut & Bolt Kit, 86-91 Mazda RX-7
Replaces Water Pump & Water pump Housing hardware. 86-91 Mazda RX-7 (All N/A & Turbo II) The original HR SS Hardware kits. ***Pick engine year from menu.****
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Himni SS Water Pump & Housing Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Water Pump & Pump Housing hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Transition Adapter - 3" Round to UIWG Style Oval - Stainless
Special Formed Tube, 3" Round (downpipe side) to Oval UIWG style transition for use with 5 bolt internal waste gate swing valve flange found on our site. Made of stainless steel in the USA.
$16.80
Himni 1.50" Inch Straight Pipe - Stainless Steel Tube
1.50" Diameter straight Stainless Steel Pipe/Tube --- 1 ft/12 inch long. Made in the USA using only USA manufactured tubing. Himni Racing high quality, light weight, made from true 304 Stainless steel. Can be welded, clamped or used with silicone coupler connectors. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing. Perfect for custom wastegate feed & dump pipe, etc.
Rust & corrosion resistant.
Durable & light weight
Specs:
Made In USA
Diameter: 1.50" inch
Gauge (Wall thickness): 16
Length: 1 foot stick
Metal Type: 304 / 304L Stainless Steel
Himni SS Front Cover Nut & Bolt Kit, 93-99 Mazda RX-7
Replaces Front Engine Cover hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
HR 1.50" 90 Degree Turbo Silicone Coupler/Elbow
HR 1.50" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.50” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 2.00" TO 2.25" Transition Silicone Coupler
Himni Racing 2.00" to 2.25" x 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.00" To 2.50" Transition Silicone Coupler
Himni Racing 2.00" to 2.50" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.00" To 2.75" Transition Silicone Coupler
Himni Racing 2.00" to 2.75" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.00" To 3.00" Transition Silicone Coupler
Himni Racing 2.00" to 3.00" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.25" To 2.50" Transition Silicone Coupler
Himni Racing 2.25" to 2.50" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.25" To 2.75" Transition Silicone Coupler
Himni Racing 2.25" to 2.75" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.25" To 3.00" Transition Silicone Coupler
Himni Racing 2.25" to 3.00" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.50" To 2.75" Transition Silicone Coupler
Himni Racing 2.50" to 2.75" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.50" To 3.00" Transition Silicone Coupler
Himni Racing 2.50" to 3.00" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 2.75" To 3.00" Transition Silicone Coupler
Himni Racing 2.75" to 3.00" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 3.00" To 3.50" Transition Silicone Coupler
Himni Racing 3.00" To 3.50" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 3.00" To 4.00" Transition Silicone Coupler
Himni Racing 3.00" to 4.00" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.25
HR 1.25" 90 Degree Turbo Silicone Coupler/Elbow
HR 1.25" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler's wall thickness.
- Coupler Size: 1.25” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 3.00" To 3.25" Transition Silicone Coupler
Himni Racing 3.00" to 3.25" X 3.00" Long. High heat, high quality, mutable ply, fiber reinforced silicone transition connecter / coupler for intercooler pipe connections & intakes. Smooth glossy finish. Pick Red, Blue or Black.
These transition hoses allow you to adapt between two different sizes of pipes. Step up or step down from the intercooler, turbo inlets, compressor outlets, etc. All hose sizes are measured by inside diameter, 2" ID hose fits 2" OD tubing for example.
$17.50
Compressor Outlet Flange ONLY - GT25R GT28R GT28RS
Made In The USA
HR 3 Bolt Compressor Outlet flange only.(no slip on lip) Mild Steel, Fits many T25, T28, GT25R, GT28R, GT28RS turbochangers. 2.00" I.D., 3 bolt mounting pattern. Allows you to directly weld a intercooler pipe to the flange. Great for tight spaces. Machinced for welding to a steel tube/pipe.
- Brand: HIMN'I Racing
- Design: HR 3 Bolt GT25R/GT28R Compressor Outlet flange only.
- Bolt Hole size: For use with standard 8mm or SAE equivalent
- Inner Diameter: 2.00" inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 1/4" inch
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
T/S/MID GT Series Turbo Oil Return Flange & Gasket (T3,T4)
Made In USA. Himni Racing T-Series, S-Series & MID sized GT Series turbo oil return/drain/outlet adapter flange & gasket set. For use with all the turbochargers listed below. Machined from T6 air craft grade aluminum to be lightweight, durable & to provide an exact fit with leak-free sealing. Highest quality available. The center oil drain port is threaded with a 1/2" female NPT for use with any standard 1/2" NPT fitting.
- Brand: HIMN'I Racing
- Design: T/S/MID GT Oil Return Flange & Matching Gasket.
- Center Port Size: 1/2" Female NPT
- Bolt Spacing: 50.80mm from the center of one hole to the center of the other. (on center)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Material Type: T6 Billet aluminum
- Finish: Excellent, Raw, Smooth Machined
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not otherwise fail.
Fits Most T Series, S Series & MID sized GT turbos including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, T51R, GT40, GT40R, GT40RS, GT4088, GT4088R, GT4094, GT4094R, GTX4088R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, S200SX, S248 (S200SX-48mm), S250 (S20SX-50mm), S251R (S200SX-51mm), S256 (S200SX-56mm), S300SX, S300SX3, S360 (S300SX-60mm) S363, (S300SX-63mm) S366 (S300SX-66mm), S371, S372, S374 S375, S400SX3, S467 (S400SX3-67mm), S471 (S400SX3-71mm), S474 (S400SX3-74mm, S475 (S400SX3-75mm), S476 (S400SX3-76mm), S480 (S400SX3-80mm), S482 (S400SX3-82mm)
Note:: For larger frame turbos (GT42R+, S400SX4+) use part number W15A035 oil return flange.
$17.95
Himni Transition Adapter- 3" Round to Oval - Stainless
Made In USA. HR formed 3.00" round to oval Stainless Steel Smooth Transition reducer pipe/ adapter tube. Works great with T3, T3/T4, T25/T28 turbo oval downpipe exhaust flanges any other application requiring an oval transition in a short distance. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Round TO Oval SS transition.
- Adapter Side #1: 3.00" O.D. Round
- Adapter Side #2: 3.00" O.D. Oval (3.50" long X 2 1/8" short)
- Overall Height/Length: 1.50" long
- Material Type: 16 Gauge US Stainless Steel, extremely durable.
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
2" V-Band Turbo Flange Downpipe Exhaust Stainless
Made In USA. HR 2" STANDARD V-Band Flange. Includes (x1) Flange. Flat face, Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.
- Brand: HIMN'I Racing
- Design: 2" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 2" Inch I.D. w/ recessed alignment groove. For 2" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2" Inch I.D. / 3" O.D. (about 50.8mm) Flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$18.90
2.5" V-Band Turbo Flange Downpipe Exhaust -STANDARD Stainless
Made In USA. HR 2.50" STANDARD V-Band Flange. Includes (x1) Flange. Flat face, Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.
- Brand: HIMN'I Racing
- Design: 2.50" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 2.5" Inch I.D. w/ recessed alignment groove. For 2.5" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
For use with many T3, T4 & GT series turbos with a 2.50" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$18.90
3" V-Band Turbo Flange Downpipe Exhaust - Stainless Steel
Made In USA. HR 3.00" V-Band Flange. Includes (x1) Flange. The most commonly used 3.00" V-Flange. Flat face, your choice of mild carbon or stainless steel & choice of Outer Diameter (OD). Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.
Available in 3 Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
#3: 3.50" (3 1/2" / 90mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe. (Extra small) Only available in stainless steel.
- Brand: HIMN'I Racing
- Design: 3.00" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: See Above.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$18.90
GT Turbo Oil Return Adapter Flange & Gasket (GT15 - GT35R)
Made In USA. Himni Racing GT-Series turbo oil return/drain/outlet adapter flange & gasket set. For use with all Garrett GT15-GT35R & T25/T28 turbos. Machined from T6 air craft grade aluminum to be lightweight, durable & to provide an exact fit with leak-free sealing. Highest quality available on the market today. The center oil drain port is threaded with a 1/2" female NPT for use with any standard 1/2" NPT fitting.
- Brand: HIMN'I Racing
- Design: GT15-GT35R, T25/T28 Turbo Oil Return Flange & Matching Gasket.
- Center Port Size: 1/2" Female NPT
- Bolt Spacing: 38mm from the center of one hole to the center of the other. (on center) Slotted
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Material Type: T6 Billet aluminum
- Finish: Excellent, Raw, Smooth Machined
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not otherwise fail.
Fits most of the Garrett GT15-35R, T25/T28 & all Borg Warner EFR. This includes:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R.
EFR 6255/ 6258/ 6758/ 7064/ 7670/ 8374/ 9180
Note: Does not fit GT40R+ or larger turbos. Please see our T/S-series oil return flanges.
$18.95
3" V-Band Turbo Flange Downpipe w/ o2 Port Stainless Steel
Made In USA. HR 3.00" o2 PORT V-Band Flange. Flat face, for 3" down pipes, has a integrated O2 bung port. Connects to the back of a turbo. The o2 port is threaded to a common 18mm & fits most o2 sensors, including Bosch units. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner groove on the pipe side insures a smooth transition from flange ID to tube ID.
Available in 2 Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
- Brand: HIMN'I Racing
- Design: 3.00" o2 Port V-Band Flange.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch I.D. with 3 3/4" OR 3 5/8" O.D. (select from menu)
- Overall Thickness/Height: 1 1/2" inch (1.50")
- Material Type: Mild Carbon Steel or Stainless steel. (Select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$19.95
Himni 2.00" 180 Degree U Bend - Mild Steel Tube
2.00" diameter, 180 degree mild steel u-bend pipe/elbow/tube. Smooth mandrel bent with tight 2" center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from aluminized mild steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "quality" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Center Line Radius: 2 inch
Leg Length: 6 Inch
Metal Type: Aluminized coated Mild steel
Bend Type: Smooth mandrel
Himni 3" To 60mm Transition Pipe/Tube - Stainless Steel
Made In USA. HR 3.00" to 60mm Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Legs can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 60 millimeter SS transition.
- Adapter Side #1: 3" O.D.
- Adapter Side #2: 60 mm O.D.
- Overall Height/Length: 3.75" long w/ legs, 1.00" long when legs are removed.
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Himni 1.50" 45 Degree Pipe Dump Tube - Stainless Steel
Stainless steel, smooth mandrel bend, 1.50" diameter wastegate dump tube. (45 degree elbow) This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Bend Degree: 45
Diameter: 1.50" inch O.D.
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
Himni 1.75" 45 Degree Pipe Dump Tube - Stainless Steel
Stainless steel, smooth mandrel bend, 1.75" diameter wastegate dump tube. (45 degree elbow) This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.75" inch O.D.
Bend Degree: 45
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
Himni 1.75" 90 Degree Pipe Dump Tube - Stainless Steel
Stainless steel, smooth mandrel bend, 1.75" diameter 90 degree elbow. This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.75" inch O.D.
Bend Degree: 90
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
Himni 1.00" Inch 90 Degree Pipe - Stainless Steel Tube
1" diameter 90 degree Stainless Steel pipe/tube/elbow. Smooth mandrel bent with extra long legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, light weight, made from 304 Stainless steel. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 1.00" inch O.D.
Bend Degree: 90
Gauge (wall thickness): 16
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
Himni 2.00" 135 Degree Pipe - Mild Steel Tube
2" diameter 135 degree Mild Steel pipe. Smooth mandrel bent with tight 3" center line radius & 6" legs. Can be welded, clamped or used with Silicone coupler connectors. Made in the USA using only USA manufactured tubing. Guaranteed superior strength & durability compared to other so called "quality" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 135
Gauge (wall thickness): 16
Center Line Radius: 3 inch
Leg Length: 6 Inch
Metal Type: Aluminized coated Mild Steel
Bend Type: Smooth mandrel
Himni 2.50" 135 Degree Pipe - Mild Steel Tube
2.50" diameter 135 degree bend Mild Steel pipe. Smooth mandrel bent with tight 3.75" center line radius & 6" legs. Can be welded, clamped or used with Silicone coupler connectors. Made in the USA using only USA manufactured tubing. Guaranteed superior strength & durability compared to other so called "quality" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.50" inch O.D.
Bend Degree: 135
Gauge (wall thickness): 16
Center Line Radius: 3.75 inch
Leg Length: 6 Inch
Metal Type: Aluminized Coated Mild steel
Bend Type: Smooth mandrel
LARGE GT Series Oil Return Flange & Gasket GT45/47/55
Made In USA. Himni Racing Extra Large T-Series, S-Series & Big GT Series turbo oil return/drain/outlet adapter flange & gasket set. For use with all the large fame turbochargers listed below. Machined from T6 air craft grade aluminum to be lightweight, durable & to provide an exact fit with leak-free sealing. Highest quality available. The center oil drain port is threaded with a 1/2" female NPT for use with any standard 1/2" NPT fitting. Added surface area provides the ideal design for extra large turbos.
- Brand: HIMN'I Racing
- Design: Large T/S/GT Oil Return Flange & Gasket.
- Center Port Size: 1/2" Female NPT
- Bolt Spacing: 50.80mm from the center of one hole to the center of the other. (on center)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Material Type: T6 Billet aluminum
- Finish: Excellent, Raw, Smooth Machined
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not otherwise fail.
Fits extra large T Series, S Series & GT turbos including:
T80, T88, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, GT47, GT47R, GT4708, GT4708R, GTX4708R, GT4718, GT4781R, GT55, GT55R, GT5518, GT5518R, GT5533, GT5533R, S400SX3, S467 (S400SX3-67mm), S471 (S400SX3-71mm), S474 (S400SX3-74mm, S475 (S400SX3-75mm), S476 (S400SX3-76mm), S480 (S400SX3-80mm), S482 (S400SX3-82mm, S400SX4, S400SX4-71mm, S400SX4-75mm, S400SX4-80mm
3.50" V-Band Turbo Flange Downpipe - Stainless Steel
Made In USA. HR 3.50" V-Band Flange. Flat face, for use w/ 3.50 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Perfect for use with our 3.50" v-band clamp.
- Brand: HIMN'I Racing
- Design: 3.50" V-Band Flange.
- #1 Tube/Pipe Side: 3.50" Inch I.D. w/ recessed alignment groove. For 3.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.50" Inch I.D. / 4.25" O.D. (108mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$21.99
Himni 2.50" 180 Degree U Bend - Mild Steel Tube
2.50" diameter, 180 degree mild steel u-bend pipe/elbow/tube. Smooth mandrel bent with tight 4.00" center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from aluminized mild steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "quality" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.50" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Center Line Radius: 4.5 inch
Leg Length: 12 Inch
Metal Type: Aluminized coated Mild steel
Bend Type: Smooth mandrel
1.75" Braided Exhaust Flex Joint 4.00" Long Stainless Steel
Made in USA.
1.75" diameter, 4.00" long, Stainless Steel Braided exhaust Flex Joint. High quality USA made item perfect for downpipes & exhaust. The 1.75" size makes it the ideal choice for use with a waste gate dump tube to down pipe connections. Matches up with the TiAL 44mm wastegate dump perfectly.
Under normal driving, the engine moves/"rocks" in the engine bay & in racing conditions, this movement can be very violent. This puts allot of stress on the a header, manifold, turbocharger & exhaust system. The result can be a cracked header, manifold, busted exhaust mounts or even damage to a turbocharger. The use of a flex joint on the downpipe and or exhaust absorbs this movement, not allowing it to be transferred to the vial components. High quality piece with restriction-free flow design.
$22.90
Himni 2.50" Inch 45 Degree Pipe - MILD Steel Tube
2.50" diameter 45 degree Stainless Steel pipe/tube/elbow. Smooth mandrel bent with tight 2.5" center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, light weight, made from mild steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed Superior strength & durability. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.50" inch O.D.
Bend Degree: 45
Gauge (wall thickness): 16
Center Line Radius: 2.5 inch
Leg Length: 6-8 Inch
Metal Type: Aluminized Coated Mild steel
Bend Type: Smooth mandrel
T3 3 Bolt Downpipe Internal Wastegate Mounting Flange: 2.50"
Made In The USA
HR 3 Bolt T3 2.50" Internal waste gate mounting flange/ adapter. Used for downpipe to turbine hosuing discharge connection. This flange is most often used on T3 5 bolt exhaust housings that use an internal wastegate swing valve housing with a 3 bolt down pipe outlet. Easily welds to any 2.5" downpipe to allow for simple turbo connection. This flange also bolts to our T3 5_bolt internal wastegates swing valve housings.
- Brand: HIMN'I Racing
- Design: T3 2.50" 3 Bolt exhaust flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" w/ recessed alignment lip/groove. For 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
2.25" Braided Exhaust Flex Joint 6.00" Long Stainless Steel
2.25" diameter, 6.00" long, Stainless Steel Braided exhaust Flex Joint. High quality USA made item perfect for downpipes & exhaust.
Under normal driving, the engine moves/"rocks" in the engine bay & in racing conditions, this movement can be very violent. This puts allot of stress on the a header, manifold, turbocharger & exhaust system. The result can be a cracked header, manifold, busted exhaust mounts or even damage to a turbocharger. The use of a flex joint on the downpipe and or exhaust absorbs this movement, not allowing it to be transferred to the vial components. High quality piece with restriction-free flow design.
$23.95
2.5" V-Band Exhaust Downpipe Flange -DUAL STEP Stainless Steel
Made In USA. HR 2.50" Dual Step V Band flange. As a special feature, this flange is made so that it can be used with either a 2.50" or 3.00" downpipe/tube. (double step) With the machined alignment lips, a 2.5" pipe can slipped on the inside diameter of the flange or a 3" pipe can be used on the outside diameter of the flange. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.
- Brand: HIMN'I Racing
- Design: 2.50" Dual Step V Band exhaust mounting flange.
- #1 Tube/Pipe Side: 2.50" Inch I.D./ 3.00" Inch O.D. w/ recessed alignment lip/groove. For 2.50" or 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$24.00
Himni Racing ' iBoost ' Turbo T-Shirt-SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories" The HR iBoost shirt is one of our favorites. And in this case, a picture is worth a 1000's words. Unique & funny with great detail.
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni Racing 'Boost Junkie' Tribal Turbo T-Shirt-SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories"
The HR Boost Junkie T-shirt features the Himni Racing Tribal Turbocharger Logo. For the hard core boost addicted, the design says it all. With a detailed ported compressor housing, this shirt is very cool!
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni Racing 'Eat Sleep Boost' Turbo T-Shirt- SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories"
The HR Eat Sleep Boost shirt is a classic. If you're all about turbos & HP, this shirt is another the perfect choice.
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni Racing 'Rotor Head' Rotary T-Shirt- SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories"
The HR Rotor Head shirt is funny & laid back. Ideal for the easy going rotary engine/ RX-7 guys, it always brings a good laugh.
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni Racing 'Tuna' Microtech EMS T-Shirt- SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories"
The Himni Racing Tuna Microtech shirt is a hit. It features a detailed design of the actual Microtech EMS (ECU) LT series hand set (hand controller) that's used to tune the MT stand alone systems. The screen even displays actual program settings on a monster scale! Perfect for any car guy that loves their Microtech.
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni Racing 'Under Pressure' Turbo T-Shirt-SOLD OUT
Temperately sold out. The die cut decal of this design is still available. Please check out site under category "Accessories"
The HR Under Pressure shirt is another classic design that is never dated. Right to the point & all about turbos.
Your choice of:
1: Size
2: Shirt & Graphic colors
3: Graphic Placement/Location.
- Select from menu.
Himni Racing has a variety of Turbo, Rotary, Import performance & race inspired t-shirts. Each one features unique custom designed graphics only available though HR. Every one is printed on name brand durable cotton/polyester blend that will last for years. Machine washable with generous sized graphics. Limited supplies, get yours while they last!
Each shirt comes with a front & back image design. You select where you want the main (big) graphic placed. If on the back, then the front gets the small HR logo Top/Left. If you want the main graphic on the front, the back gets the small HR logo High/Center (under collar).
$24.00
Himni 2.00" Inch Straight Pipe - Stainless Steel Tube
2" Diameter straight Stainless Steel pipe/tube --- 2 ft. long. Made in the USA using only USA manufactured tubing. Himni Racing High quality, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Rust & corrosion resistant.
Durable & light weight
Specs:
Made In USA
Diameter: 2.00" inch
Gauge (Wall thickness): 16
Length: 2 foot stick
Metal Type: 304 / 304L Stainless Steel
Himni 2.25" Inch Straight Pipe - Stainless Steel Tube
2.25" Diameter straight Stainless Steel pipe/Tube --- 2 ft. long. Made in the USA using only USA manufactured tubing. Himni Racing High quality, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.25" inch
Gauge (wall thickness): 16
Length: 2 Foot Stick
Metal Type: 304 / 304L Stainless Steel
T3 GT 4 Bolt Downpipe Flange - 3.00"Tube/Pipe, Stainless Steel
Made In The USA
Available in solid 304 Stainless Steel or Mild Steel. (Select flange material from menu) HR 3.00" inch inner diameter GT 4 Bolt turbo exhaust/downpipe flange/adapter/connecter. Features a machined recessed lip to insure simplified proper tube/pipe alinement & eliminates the edge of the tube from the exhaust flow path.
- Brand: HIMN'I Racing
- Design: GT 3" 4 Bolt Turbo Downpipe/Discharge Mounting Flange for T3 inlet turbine housings.
- Bolt Spacing: See Image
- Inner Diameter: 3.00" w/ recessed lip. For 3.00 inch O.D. tube/pipe/downpipe/exhaust
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Material Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits many turbochargers with a 3.00" GT 4 Bolt exhaust/turbine housing, Including:
T3/60-1, T3/T04S, T3/T04R, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$24.95
Himni 2.25" Inch 90 Degree Pipe - Stainless Steel Tube
2.25" diameter 90 degree Stainless Steel pipe/tube. Smooth mandrel bent with tight 2.25" center line radius & 2.25" legs. High quality, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.25" inch O.D.
Bend Degree: 90
Gauge (wall thickness): 16
Center Line Radius: 2.25 inch
Leg Length: 2.25 Inch
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
2.00" Braided Exhaust Flex Joint 6.00" Long Stainless Steel
Made in USA.
2.00" diameter, 6.00" long, Stainless Steel Braided exhaust Flex Joint. High quality USA made item perfect for downpipes & exhaust.
Under normal driving, the engine moves/"rocks" in the engine bay & in racing conditions, this movement can be very violent. This puts allot of stress on the a header, manifold, turbocharger & exhaust system. The result can be a cracked header, manifold, busted exhaust mounts or even damage to a turbocharger. The use of a flex joint on the downpipe and or exhaust absorbs this movement, not allowing it to be transferred to the vial components. High quality piece with restriction-free flow design.
$25.90
Himni 1.50" 90 Degree Pipe Dump Tube - Stainless Steel
Stainless steel, smooth mandrel bend, 1.50" diameter wastegate 90 degree elbow dump tube. This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.50" inch O.D.
Bend Degree: 90
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
T3 T3/T4 Turbo/Manifold Inlet Flange - Undivided Stainless Steel
Made In The USA
Your choice of Mild or 304 Stainless Steel, select from menu. HR T3 (T31, T3/T4) undivided turbo/manifold inlet flange/adapter/connecter. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the US, threaded/tapped bolt holes, excellent finish, highest quality available. Perfect for building your own custom manifold, modifying a existing manifold, etc.
- Brand: HIMN'I Racing
- Bolt Spacing: See Image
- Bolt Hole size: 10mm X 1.50 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Works with any turbo using a T3 undivided turbine/exhaust housing, such as:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3067R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Besides, do you really want a part made by a 9 year old in a sweat-shop? Use an HR flange to insure the very highest of quality.
$25.90
4" V-Band Flange For Downpipes - Stainless Steel 4.62" OD
Made In USA. HR 4.00" V-Band Flange. Flat face, for use w/ 4.00 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Perfect for use with our 4.00" SS v-band clamp.
- Brand: HIMN'I Racing
- Design: 4.00" V-Band Flange.
- #1 Tube/Pipe Side: 4.00" Inch I.D. w/ recessed alignment groove. For 4.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.00" Inch I.D. / 4.62" O.D. (120.65mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
Fits many turbos with a 4.00" v-band turbine/exhaust discharge outlet including: Garrett GT42, GT42R, GT42RS, GT4294, GT4202, GT4294R, GT4202R, GTX42R, GT4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R
Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$25.95
T25/T28/GT25/GT28 Turbo/Manifold Inlet Flange - Stainless Steel
Made In The USA
Your choice of Mild or 304 Stainless Steel, select from menu. T25/T26/GT25/GT28 turbo/manifold inlet flange. Industry standard design, full 1/2" thick will not crack or warp under high heat, precision CNC machined in the USA, threaded/tapped bolt holes, excellent finish, highest quality available.
Perfect for building your own custom manifold, modifying a existing manifold, etc. Same type of flange/bolt pattern as found on many OEM manifolds, including the 240sx (SR20DET)engine.
Himni Racing T25/GT25 Turbo/Manifold Inlet Flange
- Bolt Spacing: See Image
- Bolt Hole size: 8mm X 1.25 thread pitch (proper course thread used for high heat applications prevents seizing)
- Material Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defacts. Garrenteed to never crack, warp or otherwise fail.
Works with any turbo using a T25, T28, GT25R, GT28R, turbine/exhaust housing, such as:
T25, GT25, GT25R, GT2554R, T28, GT28, GT28R, GT2560R, GT28RS, GT2860RS, GT2871R, GT25/40R, GT2876R, GTX28R, GTX2860R, GTX2863R, GTX2867R, GT3071R-WG, GTX3071R, GT3076R, GT3076R-WG, GTX3076R, S200, etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$25.95
2.5" 6 Bolt Downpipe Mounting Flange: Garrett GT32 GT3271
Made In The USA HR 6 Bolt downpipe discharge mounting flange for Garrett GT32 GT3271 turbo. Fits both internal & External wastegated housings. Easily welds to any 2.5" + downpipe to allow for easy downpipe to turbo connection. Machined recessed tube fit lip.
- Brand: HIMN'I Racing
-
- Design: GT32 exhaust downpipe flange
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Inner Diameter: 2.50" w/ recessed lip. For 2.50 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/8" inch (0.375") Resists Warping
- Material Type: Mild Carbon Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
GT Series TO T Series Turbo Return/Drain Flange Adapter Kit
Made In The USA
HR GT series TO T series Oil return/drain flange adapter kit allows your original/existing T series (T3, T4, etc) turbo flanged oil drain/return line to be used with a Garrett GT series (GT28R/GT30R/GT35R)turbocharger. Eliminates the need to buy all new flanges /fittings when converting to a GT frame turbo. Allows you to use your original return lines with your new GT turbo.
Machined aircraft grade aluminum, strong, lightweight, reusable, double O-ring grooved. Includes: Flange, o-rings and Bolts.
$26.70
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
Himni 2.00" Mandrel 180 Degree U Bend - Stainless Steel
2.00" diameter, 180 degree Stainless Steel u-bend pipe/tube/elbow. Smooth mandrel bent with tight center line radius & 6" legs. Made in the USA using only USA manufactured tubing. Himni Racing High quality, strong, light weight, made from 304 Stainless steel. Can be welded, clamped or used with Silicone coupler connectors. Guaranteed superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including turbo downpipes, custom intakes, intercooler piping & exhaust systems.
Specs:
Made In USA
Diameter: 2.00" inch O.D.
Bend Degree: 180
Gauge (wall thickness): 16
Leg Length: 6 Inch +
Metal Type: 304 / 304L Stainless Steel
Bend Type: Smooth mandrel
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00Featured Products
Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
Bestsellers
Customer Testimonials
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
Service Can't Be Beat!!
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.